Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in The Colony, TX (75056) · Local Professionals

Plano Metal Roofing · Fast response in The Colony and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

The Colony sits right on the edge of Lewisville Lake, and the wind that comes off that open water hits the rooftops here in a way it just doesn't a few miles inland. Most of the housing stock is 1980s to 2000s brick and stone, two-story homes with steep roofs, and those lake-facing subdivisions off North Colony Boulevard and Paige Road take a beating every spring.

We're Plano Metal Roofing, and we've been working roofs across the Plano area long enough to know exactly what The Colony throws at a roof. When your shingles start lifting after a gust or your fasteners back out on a metal panel, call us at (469) 429-0715. We'll come out, take a look, and tell you straight what you're dealing with.

Metal Roofing in The Colony (75056)

The Colony is a lake town with a roofing problem that's specific to its geography. The subdivisions along the lake, especially the ones with open sightlines across the water, catch straight-line wind that peels back shingles and works screws loose on metal panels over time. The soil here is Blackland Prairie clay that swells and shrinks with the seasons, and that movement can throw off flashing details around chimneys and skylights. A lot of these homes have steep architectural-shingle roofs that are now 20 to 30 years old, and the combination of hail in the spring and 100-degree summers has a lot of them at the end of their service life. We see everything from standard three-tab shingle roofs to standing seam metal, and we know how each one behaves in this climate.

Our team has worked on homes throughout The Colony and the surrounding Plano area, from the older ranches near the lake to the newer builds off Main Street. We know the local building department, we know what the HOAs around here tend to approve, and we know how to document storm damage for your insurance company without overpromising what they'll cover.

Our services in The Colony

How a Job Works in The Colony

Step 1: You call us at (469) 429-0715 or fill out a form, and we set up a free on-site assessment. We get up on the roof, check the panels or shingles, look at the flashing, the fasteners, and the decking, and give you a written estimate with no pressure and no surprises. If it's storm damage, we take photos and help you document it for your insurer.

Step 2: Once you approve the scope, we pull the permit if one is required (The Colony requires permits for full replacements, and the threshold and fees are set by the city, so we verify that with the building department before we start). We schedule the work, order materials, and coordinate with your HOA if there's a design review. On the day of, our crew protects your landscaping, sets up safely, and gets to work. Tight lots near the lake sometimes mean we need to stage materials carefully, and we plan for that.

Step 3: When the job is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you're satisfied. We don't leave until you've signed off and the yard looks like we were never there.

Pricing in The Colony depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a full replacement starts around $9 per square foot. If you're retrofitting over existing shingles, that starts around $7 per square foot, but keep in mind that code limits how many layers you can have, so we'll check that first. Repairs start at $450, and screw replacement and re-fastening starts at $750. Coating and painting start at $2.50 per square foot. Every roof is different, so the only way to get a real number is to have us out for a free estimate. Call (469) 429-0715 and we'll take a look.

My house backs up to the lake off North Colony Boulevard, and the wind seems to rip shingles off every spring. Would a standing seam metal roof hold up better?
Yes, standing seam is a great choice for lakefront homes because the panels interlock and hide the fasteners, so there are no exposed screws for the wind to grab. We install standing seam throughout The Colony, and we can walk you through the profiles and colors that work best for your home and your HOA.
A storm just came through and I've got a panel peeled back on my roof. Can you get out here today?
We prioritize storm damage calls in The Colony and the surrounding area. Call us at (469) 429-0715, and we'll get a crew out as soon as we can to secure the roof and prevent further damage. We also document everything for your insurance claim.
What's a realistic budget for a metal roof on a typical two-story home in The Colony?
For a standard 2,000 to 2,500 square foot home, you're generally looking at somewhere between $16,000 and $25,000 for a full metal roof installation, depending on the material and complexity. Standing seam and stone-coated steel run higher, while corrugated panel is on the lower end. We give free estimates so you can get an exact number.
Do I need a permit from the City of The Colony to replace my roof?
In most cases, yes, a permit is required for a full roof replacement. The exact requirements and fees are set by the city, so we always verify with The Colony's building department before starting work. We handle the permitting process for you as part of the job.
My HOA has strict rules about roof colors. Can you help me get approval before I commit?
Absolutely. We work with HOAs in The Colony regularly and can provide color samples, manufacturer specs, and any documentation your HOA needs for design review. We'll help you navigate the approval process so there are no surprises after the roof is on.
Are you fully insured for work at my home in The Colony?
Yes, we carry general liability insurance and workers' compensation coverage.
Is there anything I should do to maintain my metal roof between seasons in The Colony?
We recommend a professional inspection once a year, especially after hail season in the spring. Check for loose fasteners, debris in the gutters, and any signs of flashing wear around chimneys and skylights. A quick coating every 10 to 15 years can also extend the life of the panels. Call us at (469) 429-0715 to schedule an inspection.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm