Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in Garland, TX (75040) · Local Professionals

Plano Metal Roofing · Fast response in Garland and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Garland is a city of solid, working neighborhoods where the brick ranches and split-levels of the 1960s through 1980s still line streets like Saturn Road and Broadway Boulevard. Drive through Oakridge or Club Hill and you will see the same story: original shingle roofs that have taken decades of North Texas hail, straight-line wind, and 100-degree summers. Out by Lake Ray Hubbard and the neighborhoods off Shiloh Road, the trees are bigger, the lots are shadier, and the roofs take an extra beating from limbs and debris.

Homeowners in Garland (75040) call Plano Metal Roofing because we know this housing stock and what fails first. We are based in Plano, just up the road, and we have replaced and repaired enough roofs in Garland to know that the flashing around a 1970s brick chimney is often the real leak, not the shingles. If you are near the Downtown Garland square or out toward the eastern edge of the city, we can get a free inspection scheduled and give you a straight answer.

Metal Roofing in Garland (75040)

Most Garland roofs sit on expansive Blackland Prairie clay that moves with the seasons, which puts constant stress on roof decks and flashing details. The typical Garland home is a single-story brick ranch or a two-story traditional built between 1965 and 1985, often with a low-pitch roof over the garage and a steeper main field. That low-slope section is where we see the most trouble: wind-driven rain pushes under shingles, and old fasteners back out. Tree cover is another factor. Mature pecans and live oaks in neighborhoods like Forest Hills and Ridgewood drop limbs and fill gutters, which leads to ice damming at the eaves during the occasional winter storm and water backing up under the shingles. Our crews are used to working on tight residential lots with fences, sheds, and mature landscaping, and we plan panel staging and dumpster placement before we start so we do not tear up your lawn or block your neighbor's driveway.

We have installed standing seam, stone-coated steel, corrugated panels, and metal shingles across Garland and the surrounding Plano area. If your home is in a historic pocket near the Downtown square or under an HOA, we can talk through panel profiles and colors that meet the local rules before you commit.

Our services in Garland

How a Job Works in Garland

Step 1: You call (469) 429-0715 or request a free estimate online. We schedule an on-site assessment, usually within a couple of days. We walk the roof, check the attic and flashing points if accessible, and take photos. You get a written scope with material options and a clear price, not a high-pressure pitch.

Step 2: Once you approve, we pull the required roofing permit through the City of Garland and coordinate any HOA design review if your neighborhood has one. On tear-off day we protect landscaping, set up the dumpster where it will not block the alley or street, and keep the crew moving so the roof is dried in before the next storm. If we find rotten decking or failed flashing, we show you before we fix it.

Step 3: Cleanup is part of the job. We magnet-sweep the yard and driveway for nails, haul away all debris, and do a final walkthrough with you. We do not leave until you have looked at the work and signed off.

Pricing in Garland depends on square footage, roof pitch, the number of penetrations (chimneys, skylights, vents), and whether we are installing over existing shingles or doing a full tear-off. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Stone-coated steel and metal shingles both start at $9 per square foot, and copper or specialty metal starts at $20. Coating and painting start at $2.50 per square foot. The best way to get a real number for your Garland home is a free estimate. Call (469) 429-0715 and we will come out, measure, and give you a written price.

My Garland ranch has a low-pitch roof over the back patio and garage. Can you install metal there without a full tear-off?
Yes, in many cases we can do a metal roof over existing shingles if the decking is sound and your roof has no more than one existing layer. Low-slope sections need careful attention to underlayment and panel overlap, and we check that during the free inspection. If the decking is soft or the existing shingles are curling, we recommend a tear-off so the new metal has a clean base.
A storm just peeled back part of my metal roof near Lake Ray Hubbard. How fast can you get out?
We prioritize active leaks and wind damage. Call (469) 429-0715 and we will schedule an inspection as quickly as possible, often same day or next day depending on storm volume. We can tarp or secure the area to prevent further water intrusion and then give you a written repair estimate.
What does a typical metal roof replacement cost for a 2,000 square foot Garland home?
For a standard 2,000 square foot ranch with a moderate pitch and a few penetrations, a metal roof replacement often falls in the range of $18,000 to $24,000 depending on the panel type and whether we tear off the old shingles. Corrugated or ribbed panels are on the lower end, standing seam and stone-coated steel on the higher end. We give you an exact written price after measuring your roof.
Do I need a permit from the City of Garland for a metal roof replacement?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Garland, and the requirements can vary depending on the scope of work. We handle the permit application and inspection scheduling for you. You can verify current rules and fees directly with the City of Garland website at https://www.garlandtx.gov/ or by calling the building department.
My HOA in Garland requires a specific roof color. Can you help with approval before I order materials?
Yes. We work with HOA design review regularly in Garland neighborhoods. We can provide panel profile and color samples, and we will coordinate the submittal so you know what is approved before we order. If your property line is close to a neighbor, we also check setback and drainage so the new roof does not create a runoff problem.
Are you fully insured for work on my Garland property?
Yes. Plano Metal Roofing carries general liability insurance and workers' compensation coverage.
What should I do to maintain a metal roof in Garland between storms?
Keep gutters clear of pecan leaves and oak tassels, especially in spring and fall. Have us check fasteners and flashing every couple of years, particularly after a hail event. In Garland's heat, metal panels expand and contract daily, so screw-backed panels can loosen over time. A quick inspection and re-fastening now prevents a leak later.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm