Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in Plano, TX (75023) · Local Professionals

Plano Metal Roofing · Fast response in Plano and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Plano is a city of big skies and big roofs, from the steep, architectural-shingle peaks of Willow Bend and Deerfield to the low-slung brick ranches of Los Rios and the Craftsman cottages near Downtown Plano. The Blackland Prairie clay under those neighborhoods swells and shrinks with every wet and dry spell, and spring hail and straight-line wind do the rest. If you live in 75023, you already know that a roof here has to handle 100-degree summers, ice storms, and everything in between.

That is why homeowners around Legacy and Preston Meadows call Plano Metal Roofing. We are based here, we know the housing stock, and we install, repair, and replace metal roofs built for North Texas weather. Whether you are in a two-story brick home with a three-car garage or a 1970s split-level with a low-pitch shingle roof, we can help.

Metal Roofing in Plano (75023)

Plano sits on expansive clay soil that moves with the seasons, and that movement shows up at the roof in the form of flashing gaps, popped fasteners, and seams that separate over time. The housing stock varies block by block: 1980s and 1990s subdivisions with steep roofs and tight side yards, 1970s ranches with low slopes that are prone to ice damming at the eaves, and older Downtown cottages where chimney and dormer flashing is often the weak point. Add spring hail, straight-line wind, and long summer heat that expands and contracts every metal panel, and you get a climate that punishes a roof.

Our team has worked on all of it. We understand how HOA design review in places like Deerfield and Willow Bend can affect panel profile and color, and we know the permit process through the City of Plano. We also handle the corrugated barns and shops out toward Lucas, Parker, and Celina. When we inspect a roof in Plano, we are looking for the failure modes we actually see here: failed fasteners, separated seams, flashing leaks, and storm damage.

Our services in Plano

How a Job Works in Plano

Step 1: You call us at (469) 429-0715 or request a free estimate online. We schedule an on-site assessment, inspect the roof and attic, and talk through your options, whether that is a repair, a replacement, or a metal roof over your existing shingles. We give you a written scope and a clear price before any work begins.

Step 2: Once you approve, we pull the required permits and coordinate with your HOA if needed. On install day, our insured crews protect your landscaping and set up safely, even on tight lots in older neighborhoods. We handle everything from tear-off to panel installation, flashing, and gutters, and we keep you updated on progress and weather delays.

Step 3: When the work is done, we clean the site thoroughly, haul away debris, and walk the roof with you. We do not leave until you are satisfied and you understand how to care for your new metal roof.

Pricing for metal roofing in Plano depends on the size and pitch of your roof, the material you choose, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. A retrofit over existing shingles starts at $7, while corrugated panel roofing starts at $5.50. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot, and gutters start at $9 per linear foot. For a free estimate on your Plano home, call (469) 429-0715.

My 1970s ranch in Los Rios has a low-pitch roof and I get ice dams at the eaves. Can a metal roof help?
Yes. Low-slope roofs are common in Los Rios and Oak Point, and ice damming is a real issue when we get winter storms. We can install a standing seam or corrugated metal roof with proper underlayment and ice-and-water shield at the eaves, and we can add snow guards and ice protection starting at $1,200. The key is ventilation and flashing detail, which we inspect during the free estimate.
A hailstorm just hit our neighborhood near Legacy and I think the roof is damaged. How fast can you respond?
We offer free storm and wind damage inspections and prioritize active leaks. Call us at (469) 429-0715 and we will schedule an inspection as soon as possible, usually within a day or two depending on storm volume. We document the damage for your insurance claim and can handle emergency repairs to stop water intrusion.
What does a typical metal roof replacement cost for a two-story brick home in 75023?
Most two-story homes in 75023 have roofs in the 25 to 35 square range. At our starting price of $9 per square foot for replacement, you are looking at roughly $22,500 to $31,500 for a standard metal roof, with standing seam and specialty metals costing more. Access, roof complexity, and whether we tear off or go over existing shingles all affect the final price. We give you an exact quote after inspecting the roof.
Do I need a permit from the City of Plano to replace my roof?
Yes, roofing permits are commonly required for a full replacement or re-roof in Plano, and requirements can vary. We handle the permit application and inspections for you. You can also check the City of Plano website for general information, but we recommend confirming details with the local building department since rules and fees can change.
My HOA in Deerfield has design rules. Can you help with approval for a metal roof?
We work with HOAs regularly and can provide product specifications, color samples, and installation details for your architectural review. Some HOAs restrict panel profiles or colors, so it is best to get approval before ordering materials. We can also advise on property line setbacks if your roof drains toward a neighbor.
Are you insured for work on my Plano property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Plano's climate?
Metal roofs are low maintenance, but North Texas heat, hail, and wind can loosen fasteners over time. We recommend an annual inspection, especially after spring storm season, to check fasteners, seams, and flashing. Coating or painting every 10 to 15 years can extend the life of the finish. We offer free inspections and maintenance plans.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm