Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in Little Elm, TX (75068) · Local Professionals

Plano Metal Roofing · Fast response in Little Elm and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Little Elm sits right on the edge of Lewisville Lake, and the mix of lakefront homes, newer subdivisions, and older ranch properties means roofs here take a beating from hail, straight-line wind, and that relentless North Texas sun. If you live off Eldorado Parkway or near Little Elm Park, you already know how fast a storm can roll across the water and leave shingles scattered across your lawn.

That's why homeowners in 75068 call Plano Metal Roofing. We're based in Plano, just up the road, and we've spent years working on the brick and stone homes, lake houses, and horse properties that make up this corner of Denton County. Whether you're near the Little Elm ISD schools or out toward the lake, we know the local conditions and build roofs that hold up.

Metal Roofing in Little Elm (75068)

Little Elm is a mix of older ranches on larger lots, newer two-story subdivisions with steep roofs, and lakefront homes that catch every bit of wind coming off Lewisville Lake. The soil here is Blackland Prairie clay, which expands and contracts with the seasons and can shift foundation and roof lines over time. Many homes sit on tight lots with mature trees, so access can be tricky, and we often have to plan for staging materials in the driveway or on the street. The lake itself brings humidity and occasional ice damming in winter, plus wind-driven rain that finds every gap in flashing. We've seen it all, from corrugated barns on acreage to stone-coated steel on new builds near Paloma Creek.

Our team has worked throughout Little Elm and the surrounding Plano area, so we understand the local building codes, HOA requirements, and the specific challenges of roofing here. We know which neighborhoods have strict architectural review and which ones allow a range of metal profiles.

Our services in Little Elm

How a Job Works in Little Elm

Step 1: You call us at (469) 429-0715 or fill out our online form. We schedule a free on-site assessment at your convenience, and we'll inspect your roof, take measurements, and discuss your options. We'll also check for any active leaks or storm damage and provide a written estimate before you commit to anything.

Step 2: Once you approve the estimate, we handle the permitting with the City of Little Elm and coordinate any HOA approvals if needed. On installation day, our insured crew arrives with all materials and gets to work. We protect your landscaping and keep the site tidy. If your home is in a tighter subdivision like Paloma Creek or near the lake, we plan for material delivery and parking to minimize disruption.

Step 3: After the work is done, we do a thorough cleanup, haul away all old materials, and walk the property with you to make sure you're satisfied. We don't leave until you're happy and your roof is ready for the next North Texas storm.

Pricing for metal roofing in Little Elm depends on the size and complexity of your roof, the material you choose, and any repairs needed before installation. For a typical single-story ranch, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you're replacing an existing roof, expect starting prices around $9 per square foot, and retrofitting over shingles starts at $7 per square foot. Smaller repairs, like leak fixes or flashing work, start at $450. We always provide a detailed, no-obligation estimate so you know exactly what you're paying for. Call us at (469) 429-0715 to schedule your free estimate.

My house is near Lewisville Lake and gets hammered by wind. What's the best metal roof for that exposure?
For lakefront or exposed properties in Little Elm, we often recommend standing seam metal roofing because it has hidden fasteners and holds up better to wind uplift. Stone-coated steel is another good option that mimics the look of shingles but resists hail and wind. We'll assess your specific location and roof pitch to recommend the right system.
A storm just knocked some panels loose on my roof in Little Elm. Can you come out today?
We prioritize storm damage calls and can often schedule a same-day or next-day inspection. Call us at (469) 429-0715 and we'll get a crew out to secure your roof and prevent further damage. We also help document the damage for your insurance claim.
How much does a typical metal roof replacement cost in Little Elm?
Most homeowners in Little Elm spend between $12,000 and $25,000 for a full metal roof replacement, depending on roof size and material. Standing seam and stone-coated steel are on the higher end, while corrugated panels are more budget-friendly. We provide a free estimate so you can see exact costs for your home.
Do I need a permit for a metal roof in Little Elm, and how long does it take?
Yes, the City of Little Elm requires a permit for roof replacements and some repairs. We handle the permitting process for you and schedule inspections as required. Permit timelines vary, but we stay on top of it so your project doesn't get delayed.
My HOA has strict rules about roof color and style. Can you help with approval?
Absolutely. We've worked with many HOAs in Little Elm and can provide samples, color charts, and documentation to submit for architectural review. We'll make sure your new metal roof meets the community guidelines before we order materials.
Are you fully insured for roofing work in Little Elm?
Yes, Plano Metal Roofing is fully insured with both general liability and workers' compensation coverage.
What maintenance does a metal roof need in Little Elm's climate?
Metal roofs are low-maintenance, but in Little Elm's heat and storm environment, we recommend an annual inspection to check fasteners, seals, and flashing. After major hail or wind events, a quick check can catch small issues before they become leaks. We offer free inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm