Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in Flower Mound, TX (75022) · Local Professionals

Plano Metal Roofing · Fast response in Flower Mound and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Flower Mound is a town of big lots, horse properties, and two-story brick homes tucked between the creeks and the lakes, and its roofs take a beating from North Texas hail and summer heat. From the sprawling acreage off Cross Timbers Road to the tight, tree-lined streets near Flower Mound High School, the mix of steep shingle roofs and metal barns means you need a roofer who understands both.

Homeowners in 75022 call Plano Metal Roofing because we speak the local language: standing seam on a custom home near Bridlewood, retrofit over shingles on a 1990s build in Wellington, and a quick repair on a barn roof out toward Lantana. We are based in Plano, fully insured, and we know how to work with Flower Mound's HOA design committees and the town's permitting desk.

Metal Roofing in Flower Mound (75022)

Flower Mound sits on the Blackland Prairie, and that means expansive clay soil that shifts with every wet and dry cycle. On large lots with horse barns and detached shops, that movement can tweak framing and open up seams on corrugated metal. On the residential side, you have everything from 1980s brick traditional homes with steep architectural shingles to newer stucco-and-stone builds with standing seam and stone-coated steel. The summer sun bakes shingles until they crack, and spring hailstorms pummel roofs from the west. We see a lot of wind-lifted panels on outbuildings and active leaks where chimneys and dormers meet the roof on older homes near Old Town. Our crews handle the tight access on tree-lined streets and the long driveways off 1171 without tearing up your landscape.

We have been serving Flower Mound and the greater Plano area for years, and we know the difference between a quick patch and a proper retrofit. Whether it is a metal roof over shingles on a 1990s home or a full standing seam installation on a new build, we bring the same insured crews and attention to detail.

Our services in Flower Mound

How a Job Works in Flower Mound

Step 1: You call us at (469) 429-0715 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the flashing, fasteners, and panels, and give you a written scope with pricing. No pressure, no sales pitch.

Step 2: Once you approve, we pull the required roofing permit from the Town of Flower Mound and coordinate with your HOA if design review is needed. On the work day, our crew protects your landscaping, sets up safe access (including for steep or tall roofs), and gets to work. We keep the site tidy and communicate any surprises, like hidden rot or a second layer of shingles that needs to come off.

Step 3: When the job is done, we do a magnetic sweep for nails, haul away all debris, and walk the roof with you. We do not leave until you are satisfied and the property is clean.

Pricing in Flower Mound depends on the size and pitch of your roof, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. For a typical 2,500 square foot home, most homeowners are looking at a range that reflects the complexity of the job. We give free, no-obligation estimates and explain every line item. Call (469) 429-0715 to schedule yours.

Do I need a permit to replace my roof in Flower Mound, and does the town have specific rules for metal roofs?
Yes, the Town of Flower Mound typically requires a permit for a full roof replacement or re-roof, and the requirements can vary based on the scope of work. Metal roofs may also be subject to HOA design review depending on your neighborhood. We handle the permitting process and can provide documentation for your HOA. Always check with the town's building department for the most current rules, but we will guide you through it.
How quickly can you respond to storm damage or an active leak in Flower Mound?
We prioritize emergency calls, especially after a hailstorm or high wind event. In most cases, we can get someone out to inspect and tarp the roof within 24 to 48 hours. Call us at (469) 429-0715 and we will schedule the earliest available appointment. For active leaks, we will do what we can to stop the water from causing further damage.
What does a metal roof cost for a typical Flower Mound home, and what factors affect the price?
For a standard 2,000 to 3,000 square foot home, metal roofing typically ranges from $8 to $12 per square foot installed, depending on the material and complexity. Factors include roof pitch, number of valleys and dormers, whether we are removing old shingles, and access. We provide a detailed estimate after inspecting your roof.
Are there any historic district or HOA restrictions in Flower Mound that affect metal roof color or style?
Some neighborhoods in Flower Mound have HOA design guidelines that may restrict metal roof profiles or colors, particularly in planned communities. The town also has design standards for certain areas. We recommend checking with your HOA first, and we can provide samples and documentation to help with the approval process. We are familiar with common HOA requirements in the area.
What should I do if my neighbor's tree branches hang over my roof and cause damage?
In Texas, you generally have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first. If a branch falls and damages your roof, your insurance may cover it. We can inspect and repair any damage, and we can also advise on preventative trimming. We do not handle tree removal, but we can recommend a local arborist.
Are you fully insured for roofing work in Flower Mound?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of an accident on the job.
How often should I have my metal roof inspected in Flower Mound, and what maintenance does it need?
We recommend an annual inspection, especially after hail season in the spring. Metal roofs are durable, but fasteners can loosen over time, and debris can accumulate in valleys. A quick check of seams, flashing, and fasteners can prevent bigger problems. We offer free estimates for inspections and can perform any necessary maintenance.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm