Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in Carrollton, TX (75007) · Local Professionals

Plano Metal Roofing · Fast response in Carrollton and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Carrollton is a city of brick ranches, 1980s two-stories, and newer townhomes, all sitting on expansive Blackland Prairie clay that shifts with every wet and dry spell. From the tree-lined streets near Downtown Carrollton to the busy corridors around Josey Lane and the George Bush Turnpike, roofs here take a beating from spring hail and straight-line wind.

Homeowners in 75007 call Plano Metal Roofing because we know how Carrollton weather treats a roof. We have replaced wind-peeled panels off Rosemeade Parkway and repaired flashing leaks on brick ranches near the Elm Fork Greenbelt. Our crews are fully insured and we treat every property like it is our own.

Metal Roofing in Carrollton (75007)

Carrollton sits on that heavy clay soil, so proper roof-to-wall flashing and gutter drainage matter more than most homeowners realize. The mix here runs from 1970s brick ranches with low-slope shingle roofs to newer stone-and-stucco homes near Trinity Mills and Marsh Lane. Many older properties have tight side yards and mature pecan and live oak trees that drop limbs on roofs during spring storms. We see a lot of failed fasteners, separated seams, and chimney flashing leaks where the original shingle roof was never updated. Metal roofing handles the daily expansion and contraction of 100-degree summers far better than asphalt, and standing seam or stone-coated steel shrugs off hail that would bruise shingles.

Our team has worked across Carrollton and the surrounding Plano area for years. We know which neighborhoods have HOA design review and which older streets need extra care with ladder access and driveway protection. We pull permits through the city and coordinate inspections so you are not chasing paperwork.

Our services in Carrollton

How a Job Works in Carrollton

Step 1: Call us at (469) 429-0715 or request a free estimate online. We schedule an on-site assessment, inspect your roof and attic, and check flashing, fasteners, and panel condition. You get a written scope with pricing before any work starts. For storm damage, the inspection is free and we document everything for your insurance claim.

Step 2: Once you approve, we pull the required permit through the City of Carrollton website and schedule the crew. On tight lots near Downtown Carrollton or in older subdivisions off Belt Line Road, we stage materials carefully and protect landscaping. For HOA communities, we help you submit the panel profile and color for approval before ordering. Installation typically takes one to three days depending on roof size and whether we are doing a full replacement or a retrofit over existing shingles.

Step 3: We clean the site daily, magnet-sweep for nails, and haul away all old materials. On the final walkthrough, we show you the completed work, explain the warranty, and make sure gutters and downspouts are clear. We leave your property clean and your roof ready for the next North Texas storm season.

Pricing in Carrollton depends on roof size, pitch, access, and the condition of the existing roof. For a typical 2,000 to 2,500 square foot ranch, metal roof installation starts around $8 per square foot, standing seam runs from $10 per square foot, and a full replacement starts at $9 per square foot. If you want to go over existing shingles, retrofit pricing starts at $7 per square foot. Smaller repairs like leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney repair starts at $600. Stone-coated steel and metal shingle roofs start at $9 per square foot, and copper or specialty metal starts at $20 per square foot. We give you a clear written estimate with no surprises. Call (469) 429-0715 for a free estimate.

My brick ranch near Downtown Carrollton has a low-pitch roof. Can you install metal over the existing shingles?
Yes, in many cases we can do a metal roof over shingles retrofit, which saves on tear-off costs and landfill waste. However, Carrollton code limits how many layers you can have, and we always inspect the decking first. If the existing shingles are failing or the deck is soft, we recommend a full tear-off. We will tell you honestly which option makes sense for your home.
A spring hailstorm just hit our neighborhood off Josey Lane. How fast can you respond for storm damage?
We prioritize active leaks and wind damage. Call (469) 429-0715 and we will schedule a free inspection, usually within one to two business days. If you have a tarp emergency, we can often get a temporary cover on the same day. We document everything for your insurance claim and handle the repair or replacement from start to finish.
What does a metal roof cost for a typical Carrollton home compared to asphalt?
For a 2,000 square foot roof, metal installation starts around $8 per square foot, so roughly $16,000 and up depending on the profile. Asphalt is cheaper upfront, but metal lasts two to three times longer and holds up better to hail and summer heat. We provide a detailed estimate so you can compare the long-term value.
Do I need a permit for a metal roof replacement in Carrollton?
Yes, most full replacements and re-roofs require a permit through the city. Requirements and fees vary, so we always confirm with the local building department before starting. We handle the permit application and coordinate the inspection so you do not have to worry about it. You can also check basic information on the City of Carrollton website.
My HOA requires approval for roof color. Can you help with that process?
Absolutely. Many Carrollton neighborhoods have design review for roof profiles and colors. We provide the manufacturer specs, color samples, and panel profile drawings you need for your HOA submission. We can also adjust the installation schedule to wait for approval so you are not stuck with a rejected color.
Are you insured for work on my Carrollton property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property if anything unexpected happens on the job.
What maintenance does a metal roof need in Carrollton's heat and storm season?
Metal roofs are low maintenance, but we recommend an annual inspection, especially after hail season. Check fasteners and seals around flashing, chimneys, and skylights. Keep gutters clear of pecan leaves and debris so water does not back up under panels. A coating every 10 to 15 years can extend the finish life under the North Texas sun. Call us for a free inspection if you are not sure of your roof's condition.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm