Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in Allen, TX (75013) · Local Professionals

Plano Metal Roofing · Fast response in Allen and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Allen, Texas, grew up fast in the 1990s and 2000s, and you can see it in the brick and stone two-story homes around Watters Creek and the Allen Sports Association fields. Those steep architectural shingle roofs have taken 20 years of North Texas hail and 100-degree summers, and many are due for a serious conversation about replacement.

Plano Metal Roofing is based just down the road in Plano, and we know the 75013 ZIP code well. From the tree-lined streets near Allen High School to the newer stucco-and-stone homes off Exchange Parkway, we help homeowners stop patching failing shingles and move to a metal roof that handles hail and heat without the constant worry.

Metal Roofing in Allen (75013)

Allen sits on the Blackland Prairie, and that expansive clay soil moves with every wet and dry cycle. On older homes in the 75013 area, that movement shows up as sticking doors and, more importantly, as flashing gaps where chimneys and dormers meet the roof. The 1990s and 2000s subdivisions like Twin Creeks and Bethany Ridge have steep roofs and three-car garages, which means lots of roof planes, valleys, and penetrations to seal. Spring hailstorms and straight-line winds are the main roof killers here, followed by long summers that bake shingles until they crack and curl. Metal panels expand and contract daily, so fastener and seam quality matters more than ever. We also see ice damming at the eaves on the higher-elevation homes toward the west side, and we handle that with proper underlayment and snow guards where needed.

Our team has worked on everything from 1970s brick ranches near Allen Station Park to new construction with standing seam and stone-coated steel. We know which neighborhoods have HOA design review and which streets have tight lot access that requires careful staging.

Our services in Allen

How a Job Works in Allen

Step 1: Call us at (469) 429-0715 or request a free estimate online. We schedule an on-site assessment, inspect your roof and attic, and document everything with photos. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the required roofing permit through the City of Allen. If your neighborhood has an HOA, we help you submit the panel profile and color for approval. On tight lots in older sections, we plan material drops and dumpster placement so we do not block driveways or neighbors. Our crews are fully insured with general liability and workers' compensation, and we protect your landscaping and windows during tear-off and installation.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We do not leave until you are satisfied and the job site is spotless.

Pricing in Allen depends on roof size, pitch, access, and the condition of the existing decking. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. Repairs start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingles start at $9 per square foot, while copper and specialty metals start at $20. Coating and painting start at $2.50 per square foot. Storm and wind damage inspections are free, and we document everything for your insurance claim. Call (469) 429-0715 for a free estimate tailored to your Allen home.

My 1990s home in Twin Creeks has original shingles and hail has worn them thin. Is a metal roof over shingles a good option in Allen?
A metal roof over existing shingles, also called a retrofit, can work if your roof has only one layer and the decking is sound. It saves on tear-off costs and landfill fees, but Allen code limits the number of layers, so we verify that first. We also check flashing and ventilation, since those details matter more when you add a second layer.
A storm just peeled back panels on my roof near Allen High School. How fast can you respond?
We prioritize active leaks and wind damage in Allen and the surrounding area. Call (469) 429-0715 and we will schedule an emergency inspection, usually within 24 to 48 hours depending on storm volume. We tarp if needed, document the damage for your insurance claim, and give you a repair or replacement plan.
What does a typical metal roof replacement cost for a two-story home in the 75013 ZIP code?
Most two-story homes in Allen fall in the $15,000 to $30,000 range for a full metal roof replacement, depending on square footage, roof complexity, and panel type. Standing seam runs higher than corrugated or ribbed panels. We provide a free estimate with a line-item breakdown so you can see exactly what drives the cost.
Do I need a permit from the City of Allen for a metal roof replacement?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Allen. Requirements and fees vary, so we always confirm with the local building department before starting. You can find contact information and general city resources on the City of Allen website, and we handle the permit application and inspection coordination for you.
My HOA requires approval for a metal roof. Can you help with that, and what about property lines?
We work with Allen HOAs regularly and can provide panel profiles, color samples, and specification sheets for your architectural review. For property lines, we respect setbacks and coordinate with neighbors if access is needed. If there is a dispute, we recommend getting a survey before work begins.
Are you insured for work on my Allen property?
Yes, Plano Metal Roofing is fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Allen's climate?
In Allen, the main things are checking fasteners after major hail or wind, clearing debris from valleys and gutters, and inspecting flashing around chimneys and skylights once a year. We offer inspections and screw replacement starting at $750. Catching a loose fastener early prevents leaks and costly repairs later.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm