Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote

Metal Roofing in Rockwall, TX (75087) · Local Professionals

Plano Metal Roofing · Fast response in Rockwall and the Plano area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Rockwall sits right on Lake Ray Hubbard, and the wind that comes off the water hits everything from the historic square to the lakeside neighborhoods. If you own a cottage near Downtown Rockwall or a brick ranch off Horizon Road, you know the weather here can be rough on a roof.

That's why homeowners in 75087 call Plano Metal Roofing. We understand the mix of older homes near the courthouse and newer builds out toward Buffalo Creek, and we know how to keep the lake wind from getting under your panels. Our team is based in Plano, just up the road, and we're fully insured and ready to help.

Metal Roofing in Rockwall (75087)

Rockwall has its own set of challenges. The lake effect means wind-driven rain and occasional ice damming on the older cottages near the square. The soil is Blackland Prairie clay, which expands and contracts with the seasons, and that can shift the ground under your gutters and downspouts. Many homes here sit on sloped lots that drain toward the lake, so proper flashing and gutter placement is critical. We see a lot of historic homes with steep pitches and dormers, plus newer construction with complex rooflines that need careful panel layout.

Our team has worked all over Rockwall and the surrounding areas, from the streets around Harry Myers Park to the newer subdivisions off State Highway 66. We know how to handle the tight access in older neighborhoods and the HOA requirements in the newer ones. Whether it's a standing seam roof on a lakeside home or a metal shingle roof on a historic cottage, we've done it here.

Our services in Rockwall

How a Job Works in Rockwall

Step 1: You call us at (469) 429-0715 or fill out our contact form. We schedule a free on-site assessment at your convenience. We'll inspect your roof, take measurements, and talk through your options, whether you need a repair, a replacement, or a new installation. We'll also check for any signs of storm damage or leaks.

Step 2: Once you approve the estimate, we pull the necessary permits from the City of Rockwall. We coordinate with your HOA if you have one, and we schedule the work around your timeline. On the day of the job, our crew arrives early, protects your landscaping, and gets to work. For older homes near the square, we're careful with tight lot access and historic details. For newer homes, we make sure the color and profile match your neighborhood's guidelines.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails. We walk the property with you to make sure you're satisfied and answer any questions. We don't leave until everything looks right.

Pricing for metal roofing in Rockwall depends on the size and complexity of your roof, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles at $7. Repairs start at $450, and screw replacement and re-fastening starts at $750. For a typical 2,000 square foot home, a full replacement might run between $16,000 and $25,000 depending on the material and access. We always provide a free, detailed estimate so you know exactly what to expect. Call us at (469) 429-0715 to schedule yours.

My cottage near the Rockwall Downtown Square has a steep roof and original dormers. Can you install metal without changing the historic look?
Yes. We specialize in matching metal roofing to historic homes. For cottages near the square, we often recommend metal shingles or stone-coated steel that mimic the look of traditional materials while giving you the durability of metal. We can also work with you to choose a color and profile that fits the historic district guidelines. We'll handle the details, including flashing around dormers and chimneys, to keep the character intact.
A storm just came through and I think my metal roof has wind damage. How fast can you get someone out to Rockwall?
We offer free inspections for storm and wind damage. Call us at (469) 429-0715, and we'll schedule a visit as soon as possible, often within 24 to 48 hours. If there's an active leak, we can provide temporary repairs to prevent further damage. Our team is experienced with insurance claims and can document the damage for your claim.
What's the typical cost to replace a metal roof on a 2,000 square foot home in Rockwall?
For a 2,000 square foot home, a metal roof replacement typically starts around $18,000 for corrugated or ribbed panel roofing, and can go up to $30,000 or more for standing seam or copper. Factors like roof pitch, number of stories, and accessibility affect the price. We provide a free estimate with a detailed breakdown so you can see exactly what you're paying for.
Do I need a permit from the City of Rockwall for a metal roof replacement?
Yes, the City of Rockwall generally requires a permit for roof replacements. The requirements and fees can vary, so we always verify with the local building department before starting work. We handle the permit application and inspections for you, so you don't have to worry about the paperwork.
My HOA has strict rules about roof color. Can you help with approval?
Absolutely. We work with many HOAs in Rockwall and can provide color samples and documentation to help you get approval. We'll coordinate with your HOA to ensure the metal roof meets their guidelines, and we can suggest profiles and colors that are commonly approved in your neighborhood.
Are you fully insured for work at my Rockwall property?
Yes, we are fully insured with both general liability and workers' compensation coverage. You can have peace of mind knowing that our team and your property are protected.
What maintenance does a metal roof need in Rockwall's climate?
In Rockwall, metal roofs should be inspected annually, especially after hail season in the spring. Check for loose fasteners, debris in gutters, and any signs of sealant wear around flashing. We recommend a professional inspection every few years to catch small issues before they become leaks. Keeping gutters clear is especially important because of the lake-effect rain.
Why choose us?

Trusted professionals in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm