Serving the Plano area  ·  (469) 429-0715  ·  Open Mon-Sun 7am-7pm
📞 (469) 429-0715 Free Quote
Metal Roof Installation professional in Plano
4.9/5 168 verified Google reviews

Metal Roofing Contractor in Plano, TX · Licensed & Insured Professionals

Licensed & Insured, in Plano and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.

Licensed Contractor Licensed & Insured Free Quote 24h Locally Owned Open Mon-Sun 7am-7pm in Plano and surrounding areas
+168Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available

Your Free Quote Request

Confidential · Response within 24h

✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured
Our services

Our Metal Roofing Services in Plano

All your work handled by qualified professionals in Plano

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Simple Process

How It Works in Plano

1

Call or Request a Free Quote

Reach us by phone at (469) 429-0715 or fill out the estimate form. We get back to you within 24 hours, no commitment required.

2

We Assess On-Site

Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.

3

We Do the Work and Clean Up

Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.

Why choose us?

Trusted metal roof installation, repair, and replacement service in Plano

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

+168
satisfied clients
4.9/5Google Rating
10Years in Business
📞 (469) 429-0715

Available Mon-Sun 7am-7pm

Team Plano Metal Roofing in Plano
✅ Licensed Contractor 🛡️ Licensed & Insured ⭐ 168+ reviews
About us

Your trusted service in Plano

Plano Metal Roofing is a team of local certified professionals based in Plano. We respond quickly in Plano and surrounding areas with professional equipment suited to every job.

Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.

📞 Call (469) 429-0715
Verified client reviews

168+ Verified Client Reviews in Plano

⭐⭐⭐⭐⭐ 4.9/5 · 168 verified Google reviews

Before & after results

Our work in Plano: before & after results

Real photos of our work in Plano · Each image shows the final result achieved for our clients

Result metal roofing in Plano - Plano Metal Roofing
Result metal roofing in Plano - Plano Metal Roofing
Result metal roofing in Plano - Plano Metal Roofing
Result metal roofing in Plano - Plano Metal Roofing
Result metal roofing in Plano - Plano Metal Roofing
Result metal roofing in Plano - Plano Metal Roofing
Result metal roofing in Plano - Plano Metal Roofing
Result metal roofing in Plano - Plano Metal Roofing
Rates in Plano

Our Metal Roofing Rates in Plano · 2026 Pricing Guide

Indicative estimates: your free personalized quote is always exact

Our Rates for Metal Roof Installation in Plano

Service / CriteriaIndicative RateDetails
Exposed-fastener panel roofStarting at $8/sq ftIncludes tear-off, underlayment, corrugated or ribbed panels and standard flashing on a simple gable roof.
Standing seam metal roofStarting at $12/sq ftConcealed fasteners, formed seams and custom flashing; steep pitch and valleys move the price up.
Metal shingle or stone-coated steelStarting at $11/sq ftTextured panels for HOA-restricted subdivisions; roof complexity and panel style drive the range.
Complex or large-scale jobOn estimateMulti-valley, dormer-heavy or historic-district roofs need an on-site look before we quote a number.
TravelIncludedIn Plano and surrounding Collin County areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24 hours at (469) 429-0715, no obligation to book the work.

Our Rates for Standing Seam Metal Roofing in Plano

Service / CriteriaIndicative RateDetails
Standing seam installation (standard pitch)Starting at $10/sq ftIncludes tear-off, underlayment, roll-formed panels, and standard flashing on a typical Plano home.
Standing seam installation (steep two-story)Starting at $13/sq ftSteep pitch and second-story staging in Willow Bend and Legacy add labor hours and safety rigging.
Complex flashing and penetrationsOn estimateMultiple chimneys, skylights, or dormers need an on-site look before flashing labor is priced.
Deck repair or sheathing replacementOn estimateSoft spots found after tear-off are priced per sheet once the deck is exposed and inspected.
TravelIncludedIn Plano and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book.

Our Rates for Metal Roof Replacement in Plano

Service / CriteriaIndicative RateDetails
Standing seam metal roof replacementStarting at $9/sq ftIncludes tear-off, decking inspection, underlayment and concealed-fastener panels; steeper pitches and cut-up roof planes raise the rate.
Exposed fastener panel replacementStarting at $7/sq ftCorrugated or ribbed panels for barns, shops and simple roofs; large open spans and easy access lower the cost.
Stone-coated steel or metal shingle replacementStarting at $10/sq ftIncludes premium finish panels and trim; complex hips, valleys and dormers move the price up.
Decking repair and replacementOn estimatePriced per sheet after tear-off reveals soft or rotted decking; the condition of the deck drives this line item.
TravelIncludedin Plano and surrounding areas, no separate call-out or mileage fee
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book

Our Rates for Metal Roof Over Shingles (Retrofit) in Plano

Service / CriteriaIndicative RateDetails
Standing seam over existing shinglesStarting at $9/sq ftIncludes slip sheet, concealed clips, and seam panels; price rises with roof pitch and valley count.
Stone-coated steel over shinglesStarting at $8/sq ftIncludes textured panels and slip sheet; HOA color approval and steep pitches add to the total.
Metal shingle over shinglesStarting at $7/sq ftIncludes interlocking panels and fasteners; complex dormers and skylights raise the installed rate.
Exposed-fastener corrugated over shinglesStarting at $6/sq ftIncludes ribbed panels and washered screws; best for barns and shops on acreage.
Complex or steep-pitch retrofitOn estimateWe need an on-site look at deck condition, flashing, and access before quoting a number.
EstimateFreeResponse within 24 hours at (469) 429-0715, with no obligation to book the job.

Our Rates for Metal Roof Repair in Plano

Service / CriteriaIndicative RateDetails
Minor repair (reseal, screws, small flashing)Starting at $450Includes resealing penetrations, replacing a few screws, and resetting short flashing runs; price rises with roof height and access.
Panel replacement (1 to 3 panels)Starting at $850Includes matching panel, seam work, and sealing; cost rises with panel profile, color match, and pitch.
Storm or hail damage repairOn estimateNeeds an on-site inspection and photo documentation before a number is given, since damage extent varies widely.
TravelIncludedIn Plano and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book.

Our Rates for Metal Roof Leak Repair in Plano

Service / CriteriaIndicative RateDetails
Single leak, accessible roofStarting at $450Covers diagnosis, hose test and a straightforward fix like a pipe boot or a few fasteners.
Fastener and screw re-fasteningStarting at $650Priced by linear feet of panel row, with roof pitch and height the main cost drivers.
Flashing rebuild at chimney or dormerStarting at $950Labor-intensive on steep two-story roofs; deck condition and access move the price.
Standing seam or metal shingle seam repairOn estimateNeeds an on-site look to confirm panel type, hail damage extent and seam closure method.
Emergency tarping after stormStarting at $350Stabilizes an active leak same day; permanent repair quoted separately after inspection.
EstimateFreeResponse within 24 hours at (469) 429-0715, no obligation to book the repair.

Our Rates for Screw Replacement & Re-Fastening in Plano

Service / CriteriaIndicative RateDetails
Spot re-fastening (single slope or small section)Starting at $750Includes fastener audit, replacement of up to about 50 screws with UV washers, and photo documentation.
Full fastener replacement (up to 2,000 sq ft)Starting at $1,850Every fastener pulled and replaced with oversized screws and UV-resistant washers, with torque checked.
Full fastener replacement (2,000 to 3,000 sq ft)Starting at $2,650Larger roof footprint and higher fastener count drive the price, plus ridge cap and lap re-seal.
Re-fastening plus seam and lap re-sealOn estimateWe need to see the panel condition and seam wear on site before quoting this combined scope.
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book and no pressure.

Our Rates for Corrugated & Ribbed Panel Roofing in Plano

Service / CriteriaIndicative RateDetails
R-panel shop or garage roofStarting at $5.50/sq ftIncludes panels, screws, closures, and basic trim; gauge and color move the price
5V crimp carport or low-slope roofStarting at $6.00/sq ftIncludes cut-to-length panels and transition flashing; pitch and tie-in details raise it
Corrugated barn or agricultural shedStarting at $5.75/sq ftIncludes panels and ridge cap; multiple roof planes and skylights add labor
Retrofit over existing shinglesOn estimatePurlins, battens, and deck condition need an on-site look before pricing
TravelIncludedin Plano and surrounding Collin County areas, no separate call-out or mileage fee
EstimateFreeResponse within 24 hours at (469) 429-0715, no obligation to book

Our Rates for Metal Shingle Roofing in Plano

Service / CriteriaIndicative RateDetails
Standard interlocking metal shingle installStarting at $9/sq ftIncludes tear-off, synthetic underlayment, panels and standard flashing on a typical Plano roof.
Stone-coated steel shingle installStarting at $12/sq ftIncludes textured stone-coated panels, premium underlayment and color-matched trim work.
Slate-profile metal shingle installStarting at $14/sq ftIncludes wide slate-look panels, heavier gauge steel and detailed flashing at dormers and chimneys.
Metal shingle retrofit over existing shinglesOn estimateRequires deck inspection and code check on existing layers before a number is given.
Complex roof with multiple valleys and dormersOn estimateSteep pitch, limited access and heavy flashing detail need an on-site measurement first.
EstimateFreeResponse within 24 hours at (469) 429-0715, no obligation to book the job.

Our Rates for Stone-Coated Steel Roofing in Plano

Service / CriteriaIndicative RateDetails
Stone-coated steel roof installationStarting at $9/sq ftIncludes underlayment, panels, trim and standard flashing; steeper pitches and cut-up roofs raise the rate
Retrofit over existing shinglesStarting at $8/sq ftPanels set over the old roof where code allows; existing layer count and deck condition move the price
Full tear-off and replacementStarting at $11/sq ftRemoval of old layers, deck inspection, new underlayment and panels; deck repairs and multiple layers add cost
Storm damage repair and re-fasteningOn estimateScope depends on panel count, matching profile availability and whether flashing or deck was damaged
TravelIncludedin Plano and surrounding areas, no separate call-out or mileage fee
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book

Our Rates for Copper & Specialty Metal Roofing in Plano

Service / CriteriaIndicative RateDetails
Copper accent work (bay windows, porch roofs, dormers)Starting at $20/sq ftIncludes on-site templating, custom fabrication and soldered seams, priced by finished area and detail count
Full copper or zinc architectural roofStarting at $28/sq ftIncludes tear-off, deck inspection, underlayment and custom-fabricated panels, with pitch and access moving the rate
Aluminum specialty panels and painted metal accentsStarting at $16/sq ftIncludes painted aluminum panels and trim, with roof access and flashing complexity driving the final number
Custom fabrication and historic profile matchingOn estimateCurved bays, flared caps and historic profiles need on-site templating before a firm number is possible
TravelIncludedIn Plano and surrounding areas, no separate call-out or mileage fee
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book

Our Rates for Metal Roof Coating & Painting in Plano

Service / CriteriaIndicative RateDetails
Acrylic reflective coatingStarting at $2.50/sq ftIncludes wash, spot prime and two coats; roof pitch and access move the rate.
Elastomeric coating systemStarting at $3.25/sq ftThicker film for light pitting and seam wear; rust severity raises the price.
Rust treatment and converter systemStarting at $3.75/sq ftChemical conversion plus primer on oxidized edges; extent of rust drives cost.
Stone-coated steel recolorStarting at $4.25/sq ftHand-applied specialty coating on valleys and details; roof complexity moves it.
Complex or large-scale jobOn estimateSteep multi-level roofs and heavy rust need an on-site look before quoting.
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book.

Our Rates for Flashing, Chimney & Skylight Repair in Plano

Service / CriteriaIndicative RateDetails
Single penetration resealStarting at $600Covers one pipe boot, vent collar or small counterflashing repair with new sealant and fasteners.
Chimney flashing rebuildStarting at $950New bent counterflashing and saddle, priced by chimney width, brick condition and roof access.
Skylight curb rebuildStarting at $1,200Back pan, step flashing and curb seal replaced, higher on steep two-story roofs or multiple units.
Valley or dormer flashingOn estimateNeeds an on-site look because panel type, lap condition and debris load change the scope.
TravelIncludedIn Plano and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book.

Our Rates for Snow Guards & Ice Protection in Plano

Service / CriteriaIndicative RateDetails
Standard snow guard run over one entryStarting at $1,200Covers a typical residential run of guards over one entry or patio, including layout and sealing.
Bar and rail systemStarting at $1,800Continuous rail system for long roof runs and steep pitches above walkways, priced by linear foot.
Adhesive or seam-clamp installationStarting at $1,400No-penetration mounting for stone-coated steel or standing seam panels, priced by guard count.
Complex or large-scale jobOn estimateMulti-roof runs, steep two-story access, or heavy landscaping below need an on-site look first.
TravelIncludedIn Plano and surrounding areas, with no separate call-out or mileage fee added.
EstimateFreeResponse within 24 hours at (469) 429-0715, with no obligation to book the work.

Our Rates for Storm & Wind Damage Repair in Plano

Service / CriteriaIndicative RateDetails
Storm damage inspectionFreeFull roof walk, photo documentation of hail, wind and flashing damage, written repair versus replacement assessment
Minor storm repairStarting at $350Re-seat lifted panels, replace backed-out screws and washers, reseal flashing at one penetration
Panel and flashing repairStarting at $850Replace damaged panels and rebuild flashing at chimney or dormer, price moves with panel profile and access
Widespread storm damageOn estimateMultiple slopes affected, needs on-site look to separate repair scope from full replacement scope
TravelIncludedin Plano and surrounding Collin County cities, no separate call-out or mileage fee
EstimateFreeResponse within 24 hours at (469) 429-0715, no obligation to book the work

Our Rates for Metal Roof Inspection in Plano

Service / CriteriaIndicative RateDetails
Standard residential inspectionFree estimateVisual walk-through, fastener check and photo report included; price moves with roof height and pitch.
Pre-purchase inspection reportStarting at $249Full photo report with remaining service life estimate; price rises with roof size and penetrations.
Insurance and storm documentationStarting at $299Dated hail and wind damage documentation for claims; price depends on panel type and report depth.
Complex or large-scale jobOn estimateSteep multi-story roofs, many skylights and retrofits need an on-site look before quoting.
TravelIncludedIn Plano and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book.

Our Rates for Gutters for Metal Roofs in Plano

Service / CriteriaIndicative RateDetails
Seamless aluminum gutter, standard runStarting at $9/linear ftIncludes seamless forming, hidden hangers, and downspouts; price rises with run length and gutter width.
Standing seam compatible hanger systemStarting at $14/linear ftIncludes panel-safe clamps and strap hangers; cost moves with fascia condition and panel overhang.
Leaf protection and downspout cleanoutStarting at $6/linear ftIncludes high-flow screen and cleanout; tree cover and roof pitch drive the final number.
Complex or large-scale jobOn estimateSteep two-story roofs, buried drain lines, and HOA color restrictions need an on-site look first.
TravelIncludedIn Plano and surrounding areas, no separate call-out or mileage fee.
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book.

Our Rates for Commercial & Agricultural Metal Roofing in Plano

Service / CriteriaIndicative RateDetails
Barn or shop repair (screws, washers, reseal)Free estimateCovers backed-out screws, worn washers and failed lap sealant on exposed-fastener ag roofs
Ribbed panel install on ag buildingStarting at $3.50 per sq ftIncludes tear-off, underlayment and screw-down panels sized to the building slope
Standing seam commercial installStarting at $9.00 per sq ftConcealed clips, raised seams and flashing on strip centers, churches and shops
Insulated metal panel systemOn estimateFoam-core panels priced by span, thickness and building use
TravelIncludedin Plano and surrounding Collin County areas, no separate call-out or mileage fee
EstimateFreeResponse within 24h at (469) 429-0715, no obligation to book

Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.

See full pricing guide →

Metal Roofing Contractor in Plano, TX

Homeowners searching for a metal roofing contractor near me in Plano need a crew that understands North Texas weather and the homes it hits. Plano Metal Roofing is your local resource for metal roof installation, replacement, re-roof, and repair. We work on the steep architectural-shingle roofs of Willow Bend and Deerfield, the low-pitched ranches of Los Rios, and the newer standing seam and stone-coated steel roofs popping up across Collin County. Our network of licensed, insured local contractors knows the expansive clay soil, the spring hail, and the aging exposed-fastener roofs that need fastener service.

From Plano to Frisco, Allen, McKinney, and Richardson, we match the right metal system to your home and your budget. Whether you need a full replacement or a targeted repair, we start with a straight assessment and a clear plan. Call (469) 429-0715 or request a free estimate to get started.

Metal Roof Repair, Leaks & Screw Replacement in Plano

Metal roofs fail for predictable reasons, and most leaks start small. On 15 to 30 year old exposed-fastener roofs, the number one culprit is fasteners backing out as their EPDM sealing washers dry and shrink. Once that seal breaks, water sneaks in at every screw. Seam separation from daily thermal movement, failed pipe boots, and flashing gaps at chimneys, skylights, and valleys are close behind. Wind-lifted panels after a spring storm and punctures from fallen limbs also open the door to water.

Ignoring a small leak is expensive. Water tracks along purlins and decking far from the entry point, rotting sheathing and soaking insulation before you see a stain inside. That hidden damage is why we always inspect the full roof assembly, not just the visible drip. Our metal roof leak repair team finds the true source and fixes it right.

The honest call between repair and replacement depends on the roof. If the panels are sound and the leak is at fasteners or flashing, a full screw replacement and re-fastening often restores a watertight roof for a fraction of replacement cost. If panels are rusted through or the deck is soft, replacement makes more sense. Call (469) 429-0715 for a straight answer and a free estimate.

Metal Roofing Systems We Install in Plano

We install the full range of metal systems: standing seam with concealed clips and no exposed screws, corrugated and ribbed panels as the economical workhorse for barns, shops, and cabins, plus metal shingles, stone-coated steel, and copper or specialty metal for accents. The honest comparison: standing seam costs more upfront but has no exposed fasteners to maintain; screw-down costs less and needs its fasteners serviced over the roof's life.

We also offer metal roof over shingles (retrofit) when the deck is sound, which saves on tear-off and landfill costs. When the deck is not sound, we recommend a full tear-off. Matching the system to your home, pitch, and budget is the job, and we will tell you plainly which option fits.

How Much Does a Metal Roof Cost in Plano?

Metal roof costs in Plano are typically quoted per square foot for installations, while repairs are often flat-rate. Pricing depends on the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We do not publish fixed prices because every roof is different. For a realistic look at typical ranges, see our pricing page.

Some insurance carriers may offer premium discounts for metal or impact-rated roofs, but that varies by policy. Final pricing always depends on the roof and site conditions. Request a free estimate or a free roof inspection, and we will give you a clear, written scope before any work begins.

Storm Damage, Insurance Claims & Permits in Plano

After a storm, we inspect your roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent. Coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We never suggest a deductible can be waived, absorbed, or paid by the contractor.

On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and fees and inspection thresholds differ. Historic district or HOA design review can also affect panel profile and color choices. We are informational only here, not giving legal advice. Requirements vary, so always verify with the Plano building or planning department before starting your project. For help understanding your options, contact us.

Ready to get started? Plano Metal Roofing serves in Plano and surrounding areas. Get your free, no-obligation estimate today.

Get a Free Estimate
Free Quote

Get Your Free Quote

Metal Roofing in Plano · Response within 24h · No commitment · ☎ (469) 429-0715

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Plano ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm
Frequently asked questions

Your questions about our services in Plano

How much does metal roof installation cost in Plano?
Metal roof installation in Plano typically ranges based on roof size, panel type, and complexity, with standing seam and stone-coated steel priced differently. We provide a free, itemized estimate so you know the exact cost before any work begins.
Do you offer free metal roof estimates in Plano?
Yes, Plano Metal Roofing offers free, no-obligation estimates for installation, replacement, and repair projects. Call (469) 429-0715 to schedule an on-site assessment and a written quote.
How quickly can you respond to a metal roof emergency in Plano?
We prioritize storm and leak emergencies in Plano and typically respond within 24 to 48 hours, with faster scheduling for active leaks. Call (469) 429-0715 and we will arrange a prompt inspection and temporary protection if needed.
Do you serve all neighborhoods and areas of Plano?
Yes, we serve the entire Plano area, including residential neighborhoods, commercial properties, and agricultural buildings throughout the city and nearby communities. If your property is in or around Plano, we can schedule an inspection.
Is your metal roofing company in Plano licensed and insured?
What should I look for in a metal roofing company near me in Plano?
Look for a contractor that is licensed and insured, has local Plano experience, offers written estimates, and stands behind the work with a clear warranty. Ask about panel types, fastening methods, and whether they handle repairs and inspections after installation.
Can you install a metal roof over my existing shingles in Plano?
In many cases yes, a metal roof can be installed over existing shingles using a retrofit system, which can save time and disposal costs. We inspect your current roof structure first to confirm it is suitable for an overlay.
When is the best time of year for metal roof maintenance in Plano?
Spring and fall are ideal for preventive maintenance in Plano, before summer heat and after winter storms. We recommend an annual inspection that includes checking fasteners, seals, and flashing to catch small issues before they become leaks.